Hyundai Venue: Engine Control System / ETC (Electronic Throttle control) System

Engine Control Module (ECM). Repair procedures

ECM Problem Inspection Procedure 1. TEST ECM GROUND CIRCUIT : Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point...

Description and operation

Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS)...

Other information:

Hyundai Venue (QX) (2020-2025) Owners Manual: Normal Maintenance Schedule

I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. *1 : The drive belt should be replaced when cracks occur or tension is reduced excessively. *2 : If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended...

Hyundai Venue (QX) (2020-2025) Service Manual: Temperature Control Actuator. Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7...