Hyundai Venue: Manual Transaxle System / Troubleshooting

Hyundai Venue (QX) (2020-2025) Service Manual / Manual Transaxle System / Troubleshooting

Troubleshooting

Symptom	Suspected Area	Remedy
Abnormal noise	Oil level (Low)	To adding oil after inspect the parts (Oil seal, Drain plug, filler plug).
	Oil (Wrong)	Replace the oil.
	Synchronizer ring (Worn or damaged)	Replace the synchronizer ring.
	Gear (Worn or damaged)	Replace the gear.
	Bearing (Worn or damaged)	Replace the bearing.
Oil leak	Oil level (High)	Inspect the oil level.
	Gasket (Damaged)	Replace the gasket.
	Oil seal (Worn or damaged)	Replace the oil seal.
Hard shifting or impossible to shift	Oil (Wrong)	Replace the oil.
	Clutch (Dragging)	Inspect the clutch parts (Release fork & bearing, Clutch disc)
	Shift fork (Worn)	Replace the shift fork.
	Synchronizer ring (Worn or damaged)	Replace the synchronizer ring.
	Gear (Worn or damaged)	Replace the gear.
	Hub sleeve (Worn or damaged)	Replace the hub sleeve.
Jumps out of gear or shift lever moves excessively	Shift fork (Worn)	Replace the shift fork.
	Hub sleeve (Worn or damaged)	Replace the hub sleeve.
	Gear (Worn or damaged)	Replace the gear.
	Bearing (Worn or damaged)	Replace the bearing.

Special service tools

Special Service Tools Tool (Number and name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transaxle...

Manual Transaxle System

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Front Seat Cushion Cover. Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Hyundai Venue (QX) (2020-2025) Service Manual: Variable Intake Solenoid (VIS) Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification : 30...