Hyundai Venue: Automatic Transaxle Control System / Output Speed Sensor. Description and operation

The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor. Repair procedures

Removal    • When Diagnostic Trouble Codes (DTC) is on, perform the following procedure to replace it...

Output Speed Sensor. Specifications

Specifications ▷ Type : Hall effect sensor ▷ Specifications Items Specifications Operation condition [°C(°F)] (-40 to 150) -40 to 302 Output voltage(V) High 1...

Other information:

Hyundai Venue (QX) (2020-2025) Owners Manual: Air bag non-inflation conditions

In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts. Front air bags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact...

Hyundai Venue (QX) (2020-2025) Service Manual: Troubleshooting

Fail-safe Mode Items Fail-safe ETC Motor Throttle valve stuck at 5° TPS TPS 1 fault Replace it with TPS2 TPS 2 fault Replace it with TPS1 TPS 1, 2 fault Throttle valve stuck at 5° APS APS 1 fault Replace it with APS2 APS 2 fault Replace it with APS1 APS 1, 2 fault Throttle valve stuck at 5°    • When throttle value is stuck at 5°, engine speed is limited at below 1,500 rpm and vehicle speed at maximum 40 - 50 km/h (25 - 31mph)...