Hyundai Venue (QX): Maintenance
- Engine Compartment
- Maintenance Services
- Owner Maintenance
- Scheduled Maintenance Services
- Explanation of Scheduled Maintenance Items
- Engine Oil
- Engine Coolant
- Brake/Clutch Fluid
- Washer Fluid
- Parking Brake
- Air Cleaner
- Climate Control Air Filter
- Wiper Blades
- Battery
- Tires and Wheels
- Recommended Cold Tire Inflation Pressures
- Check Tire Inflation Pressure
- Tire Rotation
- Wheel Alignment and Tire Balance
- Tire Replacement
- Wheel Replacement. Tire Traction. Tire Maintenance
- Tire Sidewall Labeling
- Tire Terminology and Definitions
- All Season Tires. Summer Tires. Snow Tires
- Radial-Ply Tires
- Low Aspect Ratio Tires
- Fuses
- Instrument Panel Fuse Replacement
- Engine Compartment Panel Fuse Replacement
- Fuse/Relay Panel Description
- Light Bulbs
- Headlamp, Parking lamp, Daytime Running Light, Turn signal lamp, Cornering lamp and Side marker
- Type B, C
- Side Repeater Lamp Replacement
- Rear Combination Light Bulb Replacement
- High Mounted Stop Lamp & License Plate Light Bulb Replacement
- Interior Light Bulb Replacement
- Exterior Care
- Emission Control System
Front Rear If towing is necessary, we recommend you have it done by an authorized HYUNDAI dealer or a commercial tow truck service. If towing service is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing hook at the front (or rear) of the vehicle.
1. Engine coolant reservoir 2. Brake/clutch fluid reservoir 3. Air cleaner 4. Engine oil dipstick 5. Engine oil filler cap 6. Windshield washer fluid reservoir 7.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Components and components location
Component Location [Engine Room] 1. Condenser 2. Discharge hose 3. Suction & Liquid tube assembly 4. Compressor 5. Service port (High pressure) 6. A/C Pressure transducer (APT) 7. Service port (Low pressure) 8.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Warning and Indicator Lights
- Brake System
- Child-Protector Rear Door Locks
- New on site
- Most important about car
