Hyundai Venue: Body Electrical System / Keyless Entry And Burglar Alarm
Inspection
Self Diagnosis With Scan Tool
It will be able to diagnose defects of SMART KEY system with GDS quickly. GDS
can operates actuator forcefully, input/output value monitoring and self diagnosis...
Specification
Item
Specification
Power source
3V
Operating temperature
-10°C to +60°C (14°F to +140°F)
RF Modulation
FSK
LF Modulation
ASK
RF frequency
433...
Other information:
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end of the PCV
valve and make sure that intake manifold vacuum can be felt...
Removal
1.
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
2.
Disconnect the roof antenna cable and connector (A) and then remove
the antenna mounting nut (B)...
Categories
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2.
The fuel gauge is supplemented by a low fuel warning light, which will
illuminate when the fuel tank is nearly empty.
On inclines or curves, the fuel gauge pointer may fluctuate or the low
fuel warning light may come on earlier than usual due to the movement of fuel
in the tank.
read more