Hyundai Venue (QX): Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator. Repair procedures

Removal and Installation
1.
Disconnect the battery "-" terminal.
2.
Disconnect the Variable Intake Solinoid(VIS) conncetor(A).

Hyundai Venue. Variable Intake Solenoid(VIS) Actuator. Repair procedures

3.
Disconnect the lever (A) and hose (B).
4.
Loosen the mounting bolts and then remove the Variable Intake Solinoid(VIS) actuator (C).
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

Hyundai Venue. Variable Intake Solenoid(VIS) Actuator. Repair procedures

    Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 2.

    Components 1. Intake manifold 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Compressor. Description and operation

    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.

    Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation

    Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0102