| Components |

| 1. Timing
chain 2. Timing chain guide |
3. Timing
chain arm 4. Timing chain auto tensioner |
Removal • Use fender covers to avoid damaging painted surfaces.
Removal 1. Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.