Hyundai Venue: Wipers and Washers / Rear Window Wiper and Washer
The rear window wiper and washer switch is located at the end of the wiper and
washer switch lever. Turn the switch to the desired position to operate the rear
wiper and washer.
HI – High wiper speed
LO – Low wiper speed
OFF – Off
Push the lever away from you to spray rear washer fluid and to run the rear wipers
1~3 cycles. The spray and wiper operation will continue until you release the lever.
Auto rear wiper
The rear wiper will operate while the vehicle is in reverse with the front wiper
ON by selecting the function on the LCD display.
Go to ‘User Settings → Convenience → Auto Rear Wiper (in R)’.
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will
continue until you release the lever...
The Rear View Monitor will activate when the engine is running and the shift
lever is in the R (Reverse) position.
This is a supplemental system that helps provide a view of the area behind the
vehicle through the audio display while the vehicle is in the R (Reverse) position...
Other information:
Replacement
•
If necessary replace the valve body, hydraulic adjustment is
needed, replace the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
•
After the automatic transaxle assembly exchange, input the hydraulic
calibration information use a diagnostic tool...
Description
The Electronic Throttle Control (ETC) System consists of a throttle body with
an integrated control motor and throttle position sensor (TPS). Instead of the
traditional throttle cable, an Accelerator Position Sensor (APS) is used to
receive driver input...
Categories
1. Door lock/unlock button
2. Outside rearview mirror control switch
3. Central door lock switch
4. Power window switches
5. Power window lock switch
read more