Hyundai Venue: General Information / General Service Information

Hyundai Venue (QX) (2020-2024) Service Manual / General Information / General Service Information

General information

General information

Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicated the materials to be applied to parts during service...

General information

General Service Information Protection of the Vehicle Always be sure to cover fenders, seats, and floor areas prior to beginning work...

Other information:

Hyundai Venue (QX) (2020-2024) Service Manual: Components and components location

Hyundai Venue (QX) (2020-2024) Service Manual: Immobilizer Control Unit. Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors