| Components |

| 1. Front oil seal |
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2.
Removal and Installation 1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley") 2.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Replacement 1. Open the glove box. 2. Press both sides of the glove box (A) and take it out. 3. Remove the filter cover (A) by pressing the knob. 4.