Hyundai Venue (QX): Emergency Situations
- Hazard Warning Flasher
- In Case of an Emergency While Driving
- If the Engine Will not Start
- Jump Starting
- If the Engine Overheats
- Tire Pressure Monitoring System (TPMS) (Type A)
- Tire Pressure Monitoring System (TPMS) (Type B)
- Check Tire Pressure
- Tire Pressure Monitoring System
- Low Tire Pressure Telltale
- TPMS Malfunction Indicator
- Changing a Tire with TPMS
- If you Have a Flat Tire (With spare tire)
- Towing
The certification label is located on the driver’s door sill at the center pillar and shows the maximum allowable weight of the fully loaded vehicle.
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Removal 1. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 2. Loosen the mounting screws and remove the rear view camera. Installation 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Components and components location
- Front Bumper Cover. Repair procedures
- Maintenance
- New on site
- Most important about car
