Hyundai Venue: Emergency Situations / In Case of an Emergency While Driving
If the Engine Stalls While Driving
- Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
- Turn on your hazard warning flasher.
- Try to start the engine again. If your vehicle will not start, contact an
authorized HYUNDAI dealer or seek other qualified assistance.
If the Engine Stalls at a Crossroad or Crossing
If the engine stalls at a crossroads or crossing, if safe to do so, move the
shift lever to the N (Neutral) position and then push the vehicle to a safe location.
If you Have a Flat Tire While Driving
If a tire goes flat while you are driving:
- Take your foot off the accelerator pedal and let the vehicle slow down while
driving straight ahead. Do not apply the brakes immediately or attempt to pull
off the road as this may cause loss of vehicle control resulting in an accident.
When the vehicle has slowed to such a speed that it is safe to do so, brake
carefully and pull off the road. Drive off the road as far as possible and park
on firm, level ground. If you are on a divided highway, do not park in the median
area between the two traffic lanes.
- When the vehicle is stopped, press the hazard warning flasher button, move
the shift lever into P (Park), and apply the parking brake, and place the ignition
switch in the LOCK/OFF position.
- Have all passengers get out of the vehicle. Be sure they all get out on
the side of the vehicle that is away from traffic.
- When changing a flat tire, follow the instructions provided later in this
chapter.
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway...
If the Engine Doesn’t Turn Over or Turns Over Slowly
Be sure the shift lever is in N (Neutral) or P (Park). The engine starts
only when the shift lever is in N (Neutral) or P (Park)...
Other information:
Specification
Item
Specification
Power source
3V
Operating temperature
-10°C to +60°C (14°F to +140°F)
RF Modulation
FSK
LF Modulation
ASK
RF frequency
433...
Adjusting instrument cluster illumination
When the vehicle's parking lamps or headlamps are on, press the illumination
control button to adjust the brightness of the instrument panel illumination.
When pressing the illumination control button, the interior switch illumination
intensity is also adjustable...
Categories
The vehicle’s front and rear seats have adjustable head restraints. The head
restraints provide comfort for passengers, but more importantly they are designed
to help protect passengers from whiplash and other neck and spinal injuries during
an accident, especially in a rear impact collision.
WARNING
To reduce the risk of serious injury or death in an accident, take the following
precautions when adjusting your head restraints:
Always properly adjust the head restraints for all passengers BEFORE
starting the vehicle.
NEVER let anyone ride in a seat with the head restraints removed or reversed.
read more