Hyundai Venue: Cruise Control System (CC) / Cruise Control (CC) Switch. Schematic diagrams
Inspection
1.
Loosen the cruise control switch connector.
2.
Check for resistance between terminals in each switch position...
Other information:
Inspection
In the state of IGN1 ON, when the multi function switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
If IGN1 ON, The BCM monitors the range of this supply and raises up a failure
as soon as the supply’s voltage is out of range...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect ECTS connector.
3.
Remove the ECTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure
resistance between ECTS terminals 1 and 3...
Categories
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2.
The fuel gauge is supplemented by a low fuel warning light, which will
illuminate when the fuel tank is nearly empty.
On inclines or curves, the fuel gauge pointer may fluctuate or the low
fuel warning light may come on earlier than usual due to the movement of fuel
in the tank.
read more