Hyundai Venue: Motor Driven Power Steering / Components and components location
Hyundai Venue (QX) (2020-2025) Service Manual / Steering System / Motor Driven Power Steering / Components and components location
| Components Location |
|
1. Steering wheel 2. Steering column 3. MDPS motor 4. MDPS ECU 5. Tie rod end |
6. Bellows 7. Steering gear box 8. Dust cover 9. Universal joint |
Repair procedures
A/S Repair produres
MDPS System A/S Workflow
① Noise / malfunction Inspection
② Warning lamp (DTC) / CAN Line error
2 - 1 Checking Connectors and Wiring
1...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt. 2. Adjust the hood height by moving the hood overslam bumpers (C) up and down...
Hyundai Venue (QX) (2020-2025) Service Manual: Idler. Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the drive belt idler (A). Tightening torque : 42...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Operating Door Locks from Outside the Vehicle
- Type B, C
- Liftgate
- New on site
- Most important about car
Master warning mode
This warning light informs the driver the following situations.
-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
Copyright © 2025 www.hvenueqx.com