Hyundai Venue: Manual Transaxle System / Back-up Lamp Switch. Specifications
Item
|
Specification
|
Current voltage
|
13V
|
Working voltage
|
DC 10V - 15V
|
Working temperature
|
(-)30°C ~ (+)100°C
|
Voltage drop
|
Max. 0.4 V
|
Inspection
1.
Turn OFF ignition switch and disconnect the negative (-) battery cable.
2.
Remove the air cleaner and air duct...
Other information:
Removal
Head lamps become very hot during use; do not touch them or any attaching
hardware immediately after they have been turned off.
The headlamp bulb should not be removed from the headlamp assembly until
just before a new bulb is installed...
Description
•
The front impact sensor (FIS) is installed on the upper of the side
panel in Front End Module (FEM). They are remote sensors that detect
acceleration due to a collision at their mounting locations...
Categories

Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
(1) Door Lock
(2) Door Unlock
(3) Panic
Locking Your Vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood and the liftgate are closed.
read more