| Components |

| 1. Shift lever knob & boots 2. Shift lever assembly 3. Select cable |
4. Shift cable 5. Retainer 6. 4th fixing pin |
Removal 1. Turn OFF ignition switch and disconnect the negative (-) battery cable. 2. Remove the shift lever knob & boots (A) pull both of it up.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.