Hyundai Venue: Heater / Mode Control Actuator. Components and components location
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector...
Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control actuator
based on the signal of the A/C control unit...
Other information:
The indicator in the instrument cluster displays the shift lever position when
the ignition switch is in the ON position.
P (Park)
Always come to a complete stop before shifting into P (Park).
To shift from P (Park), you must depress firmly on the brake pedal and make sure
your foot is off the accelerator pedal...
Fail-safe Mode
Items
Fail-safe
ETC Motor
Throttle valve stuck at 5°
TPS
TPS 1 fault
Replace it with TPS2
TPS 2 fault
Replace it with TPS1
TPS 1, 2 fault
Throttle valve stuck at 5°
APS
APS 1 fault
Replace it with APS2
APS 2 fault
Replace it with APS1
APS 1, 2 fault
Throttle valve stuck at 5°
•
When throttle value is stuck at 5°, engine speed is limited
at below 1,500 rpm and vehicle speed at maximum 40 - 50 km/h
(25 - 31mph)...
Categories
The vehicle’s front and rear seats have adjustable head restraints. The head
restraints provide comfort for passengers, but more importantly they are designed
to help protect passengers from whiplash and other neck and spinal injuries during
an accident, especially in a rear impact collision.
WARNING
To reduce the risk of serious injury or death in an accident, take the following
precautions when adjusting your head restraints:
Always properly adjust the head restraints for all passengers BEFORE
starting the vehicle.
NEVER let anyone ride in a seat with the head restraints removed or reversed.
read more