Hyundai Venue: Head Lamp Leveling Device / Head Lamp Leveling Switch. Schematic diagrams

Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Head Lamp Leveling Device / Head Lamp Leveling Switch. Schematic diagrams

Circuit diagram

Hyundai Venue. Head Lamp Leveling Switch. Schematic diagrams

Components and components location

Head Lamp Leveling Switch. Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A)...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Front Washer Motor. Repair procedures

Inspection Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign material or contamination...

Hyundai Venue (QX) (2020-2025) Service Manual: Front Seat Belt Buckle. Repair procedures

Replacement 1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly") 2. Separate the front seat belt buckle wiring (A). 3. Loosen the mounting bolt and remove the front seat belt buckle (B)...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors