Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel.
Component Location 1. Head lamp leveling actuator(built in Head Lamp) 2. Head lamp leveling switch
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.