Hyundai Venue: Ignition Lock Switch / Description and operation

Hyundai Venue (QX) (2020-2024) Service Manual / Clutch System / Ignition Lock Switch / Description and operation

Description

–	Ignition lock switch is mounted on the clutch pedal.

–	Ignition lock switch is operated when you press the clutch pedal.

–	If the clutch pedal is not pressed down, the engine is not started.

Ignition lock & clutch switch operating locus

–

If the clutch pedal is pressed down, (B) operate ignition lock switch at a location.

Engine	Operation switch stroke
Gasoline 1.6	Clutch switch ON -> OFF (A)	Ignition lock switch OFF -> ON (B)	Switch full stroke (C)
Gasoline 1.6	87.5 ± 3°	110 ± 5.5°	140 ± 3°

Hyundai Venue. Description and operation

Specifications

Specifications Item Specifications Working voltage DC 12.5V ± 0.3V Operating force Initial position : 0...

Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel...

Other information:

Hyundai Venue (QX) (2020-2024) Owners Manual: Panic button, Start-up, Mechanical key, Loss of a smart key

Panic button Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights blink for about 30 seconds. To cancel the panic mode, press any button on the Smart Key. Start-up You can start the vehicle without inserting the key...

Hyundai Venue (QX) (2020-2024) Service Manual: Camshaft Position Sensor (CMPS). Repair procedures

Inspection 1. Check signal waveform of CKPS and CMPS using a scan tool. Specification : Refer to "Waveform" Removal • DON’T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur...