Hyundai Venue: Power Door Locks / Components and components location

Hyundai Venue (QX) (2020-2025) Service Manual / Body Electrical System / Power Door Locks / Components and components location

Component Location

Hyundai Venue. Components and components location

1. Driver power window main switch
2. Assist power window main switch
3. ICU junction block
4. Door lock knob
5. Tailgate lock actuator

6. Door lock actuator
7. Door lock/unlock switch
8. Rear power window LH switch
9. Rear power window RH switch

Power Door Locks

Power Door Lock Actuators. Repair procedures

Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Filler-Neck Assembly. Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Open the fuel filler door and unfasten the filler-neck assembly mounting botl (A). Filler-neck assembly bracket installation bolt : 7...

Hyundai Venue (QX) (2020-2025) Service Manual: CVVT (Continuously Variable Valve Timing) System. Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...