Hyundai Venue: Automatic Climate Control System / Automatic Temperature Control Mode

Hyundai Venue (QX) (2020-2025) Owners Manual / Convenient Features / Automatic Climate Control System / Automatic Temperature Control Mode

The Automatic Climate Control System is controlled by setting the desired temperature.

1. Press the AUTO button (3).

The modes, fan speeds, air intake and air-conditioning will be controlled automatically by the temperature setting you select.

2. Turn the temperature control knob (2) to the desired temperature. If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously. After the interior has cooled sufficiently, adjust the knob to a higher temperature set point whenever possible.

To turn the automatic operation off, select any button of the following:

-- Mode selection button
-- Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The ‘AUTO’ sign will illuminate on the information display once again.)
-- Fan speed control button

The selected function will be controlled manually while other functions operate automatically.

For your convenience and to improve the efficiency of the climate control, use the AUTO button and set the temperature to 72°F (22°C).

To change the temperature unit from °F to °C or °C to °F:

Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds.

Hyundai Venue. Automatic Temperature Control Mode

NOTICE

Never place anything near the ambient light/solar sensor to ensure better control of the heating and cooling system.

    Automatic Climate Control System

    1. Fan speed control knob 2. Temperature control knob 3. AUTO (automatic control) button 4. OFF button 5. Mode selection button 6. Recirculation mode/Fresh mode 7...

    Manual Temperature Control Mode

    The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected...

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: Troubleshooting


    Fail-safe Mode Items Fail-safe ETC Motor Throttle valve stuck at 5° TPS TPS 1 fault Replace it with TPS2 TPS 2 fault Replace it with TPS1 TPS 1, 2 fault Throttle valve stuck at 5° APS APS 1 fault Replace it with APS2 APS 2 fault Replace it with APS1 APS 1, 2 fault Throttle valve stuck at 5°    • When throttle value is stuck at 5°, engine speed is limited at below 1,500 rpm and vehicle speed at maximum 40 - 50 km/h (25 - 31mph)...

    Hyundai Venue (QX) (2020-2025) Service Manual: Components and components location


    Component Location 1. Driver power window main switch 2. Assist power window main switch 3. ICU junction block 4. Door lock knob 5. Tailgate lock actuator 6. Door lock actuator 7. Door lock/unlock switch 8...

    Categories

    Instrument Panel Overview

    Hyundai Venue. Instrument Panel Overview

    1. Instrument cluster
    2. Horn
    3. Key ignition switch/ Engine Start/Stop button
    4. Infotainment system
    5. Hazard warning flasher switch

    read more


     
    Copyright © 2025 www.hvenueqx.com