Hyundai Venue: Starter / Specifications
Hyundai Venue (QX) (2020-2025) Service Manual / Engine Electrical System / Starting System / Starter / Specifications
| Specification |
|
Item |
Specification |
|
|
Rated voltage |
12V, 0.9 kW |
|
|
The number of pinion teeth |
10 |
|
|
Performance [No-load, 11.5V] |
Ampere |
Max. 60A |
|
Speed |
Min. 5,500 rpm |
|
Description and operation
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable...
Components and components location
Components
1. Front bracket assembly
2. Magnet switch assembly
3. Lever
4. Reducer assembly
5. Lever stop
6...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure the distance the steering wheel can be turned without moving the front wheels...
Hyundai Venue (QX) (2020-2025) Service Manual: PTC Heater. Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Rear Combination Light Bulb Replacement
- Operating Door Locks from Outside the Vehicle
- Trip Computer
- New on site
- Most important about car
Seat Belt Warning Light
Seat belt warning light (for driver’s seat)
As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. However, if the seat belt is unfasted, a warning chime will sound for approximately 6 seconds.
Copyright © 2025 www.hvenueqx.com