Hyundai Venue: Passenger Airbag (PAB) Module / Side Airbag (SAB) Module. Components and components location
Hyundai Venue (QX) (2020-2025) Service Manual / Restraint / Passenger Airbag (PAB) Module / Side Airbag (SAB) Module. Components and components location
| Components |
| 1. Side Airbag (SAB) |
Side Airbag (SAB) Module. Description and operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when side crash occurs...
Side Airbag (SAB) Module. Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least 3 minutes
before beginning work.
2...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Input Speed Sensor. Description and operation
Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis...
Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Warning and Indicator Lights
- Lighting control
- Check Tire Pressure
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2025 www.hvenueqx.com