Hyundai Venue: Rear Seat / Rear Seat Latch. Repair procedures

Hyundai Venue (QX) (2020-2025) Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Latch. Repair procedures

Replacement

•	Put on gloves to prevent hand injuries.

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

1.	Remove the rear seat back cover. (Refer to Rear Seat - "Rear Seat Back Cover")

Remove the rear seat latch rod (A), loosen the mounting bolts and remove the rear seat latch (B).

Tightening torque :

16.7 - 25.5 N.m (1.7 - 2.6 kgf.m, 12.3 - 18.8 lb-ft)

Hyundai Venue. Rear Seat Latch. Repair procedures

3.	To install, reverse the removal procedure.

Rear Seat Latch. Components and components location

Front Seat Belt

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Auto Light Sensor. Repair procedures

Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply and raises up a failure as soon as the supply’s voltage is out of range...

Hyundai Venue (QX) (2020-2025) Service Manual: Front Pillar Trim. Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...