Hyundai Venue: Hydraulic System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS). Specifications
Hyundai Venue (QX) (2020-2024) Service Manual / Automatic Transaxle System / Hydraulic System / Overdrive Clutch Control Solenoid Valve (OD/C_VFS). Specifications
| Specifications |
|
Shape |
Items |
Specifications |
|
|
Control current (voltage) [mA] |
0 - 1100 |
|
Supply pressure [kpa (kgf/cm², psi)] |
1569.06 (16, 227.57) |
|
|
Control pressure [kpa (kgf/cm², psi)] |
0 - 1569.06 (0 - 16, 0 - 227.57) |
|
| Internal
resistance(Ω) |
5.0 - 5.6 |
Overdrive Clutch Control Solenoid Valve (OD/C_VFS). Description and operation
Description
•
Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the
valve body.
•
This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive clutch...
Overdrive Clutch Control Solenoid Valve (OD/C_VFS). Components and components
location
Component Location (1)_Valve
Body Cover
1. Valve Body Cover
2. Valve Body Cover Gasket
3. Solenoid Valve Connector
Component Location (2)_Solenoid
Valve
1...
Other information:
Hyundai Venue (QX) (2020-2024) Service Manual: Purge Control Solenoid Valve (PCSV). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect PCSV connector. 3. Measure resistance between PCSV terminals 1 and 2. 4. Check that the resistance is within the specification...
Hyundai Venue (QX) (2020-2024) Owners Manual: Detecting Sensor
The rear corner radars are located inside the rear bumper for detecting the side and rear areas. Always keep the rear bumper clean for proper operation of the system. NOTICE The system may not work properly when the bumper has been damaged, or if the rear bumper has been replaced or repaired...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Vehicle Identification Number (vin), Vehicle Certification Label
- Remote Key
- Check Tire Pressure
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2024 www.hvenueqx.com