Hyundai Venue: Important Safety Notice / General information
Proper service methods and repair procedures are essential for safe, reliable
operation of all motor vehicles as well as personal safety of the operator.
The service procedures and descriptions in this shop manual provide general
directions for service and repair.
There are various procedures, techniques, tools and pars for service as well
as the skill of technicians.
Therefore, it is impossible for this manual to provide advice or caution for
each case.
Accordingly, if you use a replacement part, service procedure, or tool which
are not recommended by the vehicle manufacturer, make sure that neither the
personal safety nor the safe operation of the vehicle is jeopardized.
| • |
Reminds you to be especially careful in those areas where carelessness
will cause death or serious injury.
|
|
| • |
Reminds you to be especially careful in those areas where carelessness
may cause death or serious injury.
|
|
| • |
Reminds you to be especially careful in those areas where carelessness
may cause personal injury.
|
|
| • |
Gives you information that will prevent you from making errors
that could damage the vehicle.
|
|
| • |
Gives you additional information that will help you complete
a particular procedure.
|
|
The following list contains some general WARNINGS that you should follow while
working on a vehicle.
| • |
Always wear safety glasses for eye protection.
|
| • |
Use safety stands whenever a procedure requires you to be under the
vehicle.
|
| • |
Make sure that the ignition switch is always in the OFF position, unless
otherwise required by the procedure.
|
| • |
Set the parking brake when working on the vehicle. If you have an automatic
transaxle, set the vehicle in the P position.
|
| • |
Place supporters against the front and rear surfaces of the tires to
prepare for the vehicle suddenly moving.
|
| • |
Operate the engine only in a well-ventilated area to avoid the danger
of carbon monoxide poisoning.
|
| • |
Keep yourself and your clothing away from moving parts when the engine
is running, especially the drive belts.
|
| • |
To prevent serious burns, avoid contact with hot metal parts such as
the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
|
| • |
Do not smoke while working on a vehicle.
|
| • |
To avoid injury, always remove rings, watches, loose hanging jewelry,
and loose clothing before beginning to work on a vehicle.
|
| • |
When it is necessary to work under the hood, keep hands and other objects
clear of the radiator fan blades! Your vehicle may be equipped with
a cooling fan that may turn on, even though the ignition switch is in
the OFF position. For this reason care should be taken to ensure that
the radiator fan electric motor is completely disconnected when working
under the hood and that the engine is not running.
|
Other information:
Removal
[Room Lamp]
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, Separate the room lamp lens (A) from
the room lamp.
•
Put on gloves to prevent hand injuries...
Description
1.
PDM(Power Distribution Module) Relay Box is used only in SMK(smart key)
variant.
2.
It consists of 3 relays namely, ACC relay, IG1 relay, IG2 relay.
3.
PDM Relay Box is exclusive used for starting purpose in SMK variant...
Categories
The vehicle’s front and rear seats have adjustable head restraints. The head
restraints provide comfort for passengers, but more importantly they are designed
to help protect passengers from whiplash and other neck and spinal injuries during
an accident, especially in a rear impact collision.
WARNING
To reduce the risk of serious injury or death in an accident, take the following
precautions when adjusting your head restraints:
Always properly adjust the head restraints for all passengers BEFORE
starting the vehicle.
NEVER let anyone ride in a seat with the head restraints removed or reversed.
read more
