| Inspection |
| 1. |
With the washer motor connected to the reservoir tank, fill the reservoir
tank with water.
|
| 2. |
Check that the motor operates normally and the washer motor runs and
water sprays from the front nozzles.
|
| 3. |
If they are abnormal, replace the washer motor.
|
| Removal |
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front right wheel guard.
(Refer to Body - "Front Wheel Guard")
|
| 3. |
Disconnect the washer motor connector (A) and washer hose (B).
|
| 4. |
Remove the washer reservoir (A) after loosening the mounting bolts.
|
| 5. |
Remove the washer motor (A) from the washer reservoir.
|
| Installation |
| 1. |
Reassemble the washer reservoir.
|
| 2. |
Connect the washer motor connector and washer hose.
|
| 3. |
Reassemble the front bumper cover.
|
Removal 1. When replacing the wiper blade, press the blade bottom clip button to remove the blade. 2.
Removal Precautions for using the plastic pulley • Be careful not to place the pulley to downwards of the floor or table.
Replacement 1. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 2. Loosen the mounting screws and remove the heater core cover (A). 3.