Troubleshooting Trouble Symptom Probable cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace Wear, rattle or scoring of wheel bearing Replace Defective front suspension and steering Adjustment or Replace Vibartion Wear, damage or bending of driveshaft Replace Driveshaft rattle and hub serration Replace Wear, rattle or scratching of wheel bearing Replace Shimmy Defective wheel balance Adjustment or Replace Defective front suspension and steering Adjustment or Replace Excessive noise Wear, damage or bending of driveshaft Replace Rattle of driveshaft and worn hub splines Replace Wear, rattle or scoring of wheel bearing Replace Loose hub nut Adjustment or Replace Defective front suspension and steering Adjustment or Replace
Components 1. Brake disc 2. Front hub 3. Dust cover 4. Front axle 5. Hub bearing 6. Snap ring
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.
Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. It also has a safety interrupt, engaged upon depressing brake or shifting select lever.