Inspection 1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3.
Description Emissions Control System consists of three major systems. – The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.