Hyundai Venue: Engine Control System / CVVT Oil Control Valve (OCV). Schematic diagrams
Hyundai Venue (QX) (2020-2025) Service Manual / Engine Control / Fuel System / Engine Control System / CVVT Oil Control Valve (OCV). Schematic diagrams
| Circuit Diagram |
[M/T]
[A/T]
Harness Connector
CVVT Oil Control Valve (OCV). Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect OCV connector.
3.
Measure resistance between OCV terminals 1 and 2...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Oil Level Gauge & Pipe. Repair procedures
Removal and Installation 1. Remove the oil level gauge & rod (A). Tightening torque : 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft) 2. Install in the reverse order of removal...
Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Lighting control
- Rear Combination Light Bulb Replacement
- Operating Door Locks from Outside the Vehicle
- New on site
- Most important about car
Seat Belt Warning Light
Seat belt warning light (for driver’s seat)
As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. However, if the seat belt is unfasted, a warning chime will sound for approximately 6 seconds.
Copyright © 2025 www.hvenueqx.com