| Components |

| 1. Luggage side trim [LH] 2. Rear transverse trim 3. Luggage board assembly |
4. Luggage side trim [RH] 5. Covering self trim assembly 6. Luggage floor net assembly |
Replacement • Put on gloves to prevent hand injuries.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.