| Components |

| 1. Rear door trim 2. Rear door module 3. Rear door hinge 4. Rear door inside weatherstrip |
5. Rear door outside weatherstrip 6. Rear door body side weatherstrip 7. Rear door side weatherstrip |
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.