| Components |

| 1. Passenger Air Bag (PAB) |
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash.
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.