Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2.
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 3. Separate the evaporator temperature sensor connector (A), loosen the mounting screws and remove the eva
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.